Product details
Suitable for various of rubber cushion application.Filler rubber belt has
double CN layers design, which ensure the good adhesive effect of filler rubber
and two faces of objects.
Product Features:
1、Strong adhesion force of CN bonding layer;
2、Easy installation;
3、Muti Specifications for different conveyor belts;
4、Shorter deliver time;
5、High rubber density and strong crushing resistance.
Product Parameters:
| Model | Width.mm | Thickness.mm | Length.mm | Parameters |
| BRS2-500-10000-1 | 500 | 2 | 10000 | 1、Without fabric; 2、Shore A Hardness: 68士5; 3、Tensile strength: 16.07MPa; 4、Elongation at break: 420%. |
| BRS3-500-10000-1 | 500 | 3 | 10000 | |
| BRS4-220-10000-1 | 500 | 4 | 10000 | |
| BRS5-300-10000-1 | 500 | 5 | 10000 | |
| BRST2-500-10000-1 | 500 | 2 | 10000 | 1、Reinforced fabric; 2、Shore A Hardness: 68士5; 3、Tensile strength: 16.07MPa; 4、Elongation at break: 420%. |
| BRST3-500-10000-1 | 500 | 3 | 10000 | |
| BRST4-500-10000-1 | 500 | 4 | 10000 | |
| BRST5-500-10000-1 | 500 | 5 | 10000 |
Application and selection guide
HFR-1 filler rubber is an accompanying material within the pulley covering range. Its intended location and compatibility with the surrounding lagging system should be confirmed before it is selected for a gap, joint or defined repair task.
Where this product fits
Show the exact area where filler is required and explain whether the work concerns a new covering or maintenance. Distinguish the filler from the main belt-contacting lagging material.
Information for a suitable proposal
Provide the joint or gap drawing, adjacent material and proposed bonding procedure. Ask the supplier to confirm that the filler belongs within the selected installation system.
Filler material is part of a defined pulley covering arrangement rather than a substitute for the selected wearing layer. Show the gap, joint or area to be filled on a drawing or clear photograph. Confirm the adjacent lagging material and the installation process before selecting a compatible product.
Installation and maintenance considerations
Inspect finished joints for lifting, separation or trapped material. Follow the agreed preparation and finishing process instead of substituting filler for a required wearing layer.
Describe the pulley duty and whether the work is a new covering or a repair. The preparation, adhesive system and finishing requirements should be agreed with the responsible installer. Before returning equipment to service, inspect the finished surface and surrounding joints according to the approved procedure, with particular attention to areas where material could lift or collect.
For related options, explore the surrounding pulley covering system or discuss the application with JuMing.